INSULATION PANELS

The "coat", more precisely referred to as "thermal insulation from the outside, to the vertical walls, with thin plaster on insulation" is the system most widely used today in Europe for the insulation of buildings, civil, industrial, service, new or existing.

The system to "coat" is an inseparable whole consisting of different elements, but between their com-compatible and synergistic:
Insulating plates EPS polystyrene (also known as polystyrene) sintered, flame retardant, size 1000x500 mm, with thicknesses depending on the need, squared with a sharp edge, quality controlled and certified according to current standards UNI EN 13499.
Glue - Skim coat to bond the insulation boards to the support and for the formation of the first layer of plaster (armed) above the plates themselves
Grids woven glass fiber - for reinforcement of the first layer of plaster
Possible primer, as the first protective plaster reinforced
Trim with continuous coating thin, protective of the entire system to weather
Silhouettes light alloy or PVC profiles for vertical and horizontal
Where necessary, dowels deep the insulation boards

NECAP LASTRA made of Neopor®


Plate printed for insulating walls, ceilings and roofs
MATERIAL
made of Neopor® Type 100 (EN 13163) Class E fire reaction
DIMENSIONS
120 x 60 cm
AVAILABLE VERSIONS
- with knocker on all sides - sharp-edged
STANDARD TICKHNESS (in cm)
4 - 5 - 6 - 8 - 10 - 12 - 14
THICKNESS ON REQUEST (in cm)
7 - 9 - 11 - 13 - 15
COLOR
Silver - Grey

ICAP LASTRA EPS


Plate printed for insulating walls, ceilings and roofs
MATERIAL
made of Neopor® Type 100 (EN 13163) Class E fire reaction
DIMENSIONS
120 x 60 cm
AVAILABLE VERSIONS
- with knocker on all sides - sharp-edged
STANDARD TICKHNESS (in cm)
4 - 5 - 6 - 8 - 10 - 12 - 14
THICKNESS ON REQUEST (in cm)
7 - 9 - 11 - 13 - 15
COLOR
White

NECAP made of Neopor®


Printed sheet insulation and special applications
MATERIAL
made of Neopor® Type 100 (EN 13163) Class E fire reaction
DIMENSIONS
120 x 60 cm
AVAILABLE VERSIONS
- sharp-edged
STANDARD TICKHNESS (in cm)
4 - 5 - 6 - 8 - 10 - 12 - 14
THICKNESS ON REQUEST (in cm)
7 - 9 - 11 - 13 - 15
COLOR
Silver - Grey

ICAP EPS


Printed sheet insulation and special applications
MATERIAL
made of Neopor® Type 100 (EN 13163) Class E fire reaction
DIMENSIONS
120 x 60 cm
AVAILABLE VERSIONS
- sharp-edged
STANDARD TICKHNESS (in cm)
4 - 5 - 6 - 8 - 10 - 12 - 14
THICKNESS ON REQUEST (in cm)
7 - 9 - 11 - 13 - 15
COLOR
White

GRID FOR PLASTER


Grid glass fiber for reinforcing plasters in coatings to coat
CERTIFICATION
ETAG 004
HOLE
mm 4x4
WEIGHT
gr/m² 15
MEASURE
rols da m 1x50
PACKAGING
rols da 50 m2

ANCHORS FOR PANELS INSULATION


With pin nylon
CERTIFICATION
ETAG 014
Approved for supports A-B-C-D-E
PACKGING
box of 100 / 200 pieces

STICKER SKIM ICSS P 500 FLEX


A concrete base, with improved mechanical performance, medium grain Specific systems of insulation with insulating panels molded polystyrene Ideal for low temperature performance
PACKAGING
Pallets of 42 bags of 25 Kg