HEATING PANELS

The principle of the radiant panel is based on the circulation of hot water at low temperature (typically between 30 and 35 ° C) in a closed circuit, which is spread over an area radiating very high.

In the simplest version, the most widespread and most effective, the system is realized by inserting the polystyrene foam above the load-bearing slab of the floor. Above the insulator are laid pipes or electric heating conductors, which are embedded completely in the support layer (the "screed"), generally consisting of concrete.

Finally, it covers the screed with the final coating: usually tiles, but also hardwood, linoleum, carpet, etc. The pitch speed is variable, even within the same room: the designer can choose to thicken the steps where you need greater thermal emission, ie close to the outer walls. The Radiant in Expanded Polystyrene ICSS have for years been recognized by the market as well performing.

FLAT PANEL PRINTED


Panels for floor heating
MATERIAL
Expanded polystyrene
CLASS OF REACTION TO FIRE
E
FEATURES
With panels in low relief that allow the alignment of pipes of any diameter. Provided on all four sides of battens with overlapping and coupling for holding during pouring of the concrete.
COATING
Polystyrene laminated high density, environmentally friendly, with the function of the vapor barrier.
PANELS DIMENSIONS (in mm)
1200 x 700
PANEL THICKNESS (in mm)
20 – 30

PANEL 5033


Panels for floor heating
MATERIAL
Expanded polystyrene
CLASS OF REACTION TO FIRE
E
FEATURES
With indentations in relief of height 18 mm, which allow the housing of the tubes, of diameter between 16 and 18 mm, in multiple steps of 50 mm. Provided on the four sides of a battens with overlapping and coupling for the seal during pouring of the concrete.
COATING
Polystyrene laminated high density, environmentally friendly, with the function of the vapor barrier and the hardening of the studs to facilitate the installation.
PANELS DIMENSIONS (in mm)
1200 x 700
PANEL THICKNESS (in mm)
33
BASE THICKNESS (in mm)
15

PANEL BUGNATO 5045 - 5060


Panels for floor heating
MATERIAL
Expanded polystyrene
CLASS OF REACTION TO FIRE
E
FEATURES
With indentations in relief of height 18 mm, which allow the housing of the tubes, of diameter between 16 and 18 mm, in multiple steps of 50 mm. Provided on the four sides of a battens with overlapping and coupling for the seal during pouring of the concrete.
COATING
Polystyrene laminated high density, environmentally friendly, with the function of the vapor barrier and the hardening of the studs to facilitate the installation.
PANELS DIMENSIONS (in mm)
1200 x 750
PANEL THICKNESS (in mm)
45 - 60
BASE THICKNESS (in mm)
25 - 40

PANEL BUGNATO 7550 - 7560


Panels for floor heating
MATERIAL
Expanded polystyrene
CLASS OF REACTION TO FIRE
E
FEATURES
With indentations in relief of height 20 mm, which allow the housing of the tubes, of diameter between 16 and 18 mm, in multiple steps of 75 mm. Provided on the four sides of a battens with overlapping and coupling for the seal during pouring of the concrete.
COATING
Polystyrene laminated high density, environmentally friendly, with the function of the vapor barrier and the hardening of the studs to facilitate the installation.
PANELS DIMENSIONS (in mm)
1200 x 750
PANEL THICKNESS (in mm)
50 - 60
BASE THICKNESS (in mm)
30 - 40